We are stuck with technology when what we really want is just stuff that works.

This is the Standard Post Format and it’s a also marked as sticky in WordPress. This mean it will always be the first post.

Lacus eu mattis auctor, dolor lectus venenatis nulla, at tristique eros sem vel ante. Sed leo enim, iaculis ornare tristique non, vulputate sit amet ante. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Aenean fringilla laoreet mauris lectus pellentesque eu.

  • The sticky post should be distinctly recognizable in some way in comparison to normal posts. You can style the .sticky class if you are using the post_class() function to generate your post classes, which is a best practice.
  • They should show at the very top of the blog index page, even though they could be several posts back chronologically.
  • They should still show up again in their chronologically correct postion in time, but without the sticky indicator.
  • If you have a plugin or widget that lists popular posts or comments, make sure that this sticky post is not always at the top of those lists unless it really is popular.

What is the difference between PU, Melamine, NC, Enamel and Polyester finishes

ENAMEL vs NITROCELLULOSE (NC) vs MELAMINE vs POLYURETHANE (PU) vs POLYESTER COATINGS/ PAINT / POLISH

The choice or painting/ coating or polishing of substrate (Wood or Metal etc) is mainly dependent on 4 factors – durability, finish, time and cost. Whether polishing/ coating or painting your doors, cabinets, frames, furniture, woodwork, grills, structures etc these four factors will play a vital role in decision making. Here are the major differences between the commonly used finishes/coatings/paints available in the market.

 

NC vs. PU revised 11-9-17.xls

NC vs. PU revised 11-9-17.xls
      
ENAMEL PAINT / POLISH/ COATINGNITROCELLULOSE (NC) PAINT / POLISH/ COATINGMELAMINE PAINT / POLISH/ COATINGPOLYURETHANE (PU) PAINT / POLISH/ COATINGPOLYESTER PAINT/ POLISH/ COATING
OTHER COMMON NAMES (In India)Synthetic Enamel, Oil PaintNC paint, Duco paint, NC Lacquer polish, Nitrocellulose paint, Duco Polish, Melamine matt polish, Melamine coating, Matt polishPU paint, PU polish, 2K paint, PU coating, PU Acrylic paint polish, High Gloss PolishPoylester lamination, Polyester polish, Lamination coating
TYPE1 component - Single pack1 component - Single pack2 component - Lacquer + Hardener2 component - Lacquer + Hardener3 component - Lacquer + Hardener + Accelerator
MAJOR BRANDSAsian Paints, Nerolac, Berger, Akzo Nobel (ICI), Shalimar.Akzo Nobel (ICI), Nippon, Nerolac, Waverley Paints- Solo, Esdee Paints, Sheenlac and many other local players. Asian Paints, Jivajor (Charmwood), MRF, Pidilite, Nerolac, Akzo Nobel (ICI) and many other local players.Imported: Sirca, ICA, Milesi, PCG, Kapci, Sherwin Williams,Asian Paints - Renner etc. Indian: Asian Paints, Jivanjor, MRF, Akzo Nobel (ICI), Nerolac, Berger and many other local players.ICA, Sirca, Asian Paints - Renner etc.
FINISH Glossy and MattGlossy, Satin and MattGlossy, Satin and MattVery High Gloss, Satin, Matt, Dead matt, Soft touch (velvet feel)Very High gloss
APPLICATIONSInterior & ExteriorInterior & ExteriorInteriorBest in class - Interior and Exterior. Acrylic based PU recommended for ExteriorsInterior
AREA OF USEWood, Metal & Wood based furniture & substrates.Wood, Metal, Fibreboard & Wood based furniture & substrates.Wood & Wood based furniture & substrates.Wood, Glass, Metals, Plastic, Floorings, Wood based furniture & substrates, Various Industrial applications.Wood & Wood based furniture especially table tops and flat areas.
DRYING TIMESlow - Long dry timeFast - Quick dryingModerateSlow - Long dry timeSlow - Long dry time
SCRATCH RESISTANCELowLowHighHigh to very highVery High - Best in class
WASHABLEYesYesYesYesYes
COST (Approx incl.labor) ON NEW SURFACEEconomical - Rs. 25 - 30 per sq. ft.Moderate - Rs. 80 - 110 per sq. ft. depending upon the colour & finish requiredModerate - Rs. 80 - 100 per sq. ft. depending upon the colour & finish requiredHigh - Rs. 120 - 220 per sq ft. depending upon th finish requiredVery High - Rs. 300 & above depending upon the thickness required.
HOW TO APPLYBrush, SpraySpraySpraySpraySpray
ADVANTAGESSYNTHETIC ENAMEL OR OIL PAINTS are: Economical, Easy to apply, Easy to repair, Water resistant, Ease of Recoat & touchup, Long pot life. Water based Enamels are also now available in the market which is better for our environment due to its low VOC & Low Odor.NITROCELLULOSE OR NC LACQUER/PAINTS are: Quick drying & hardening time, Short recoating time, Relatively low cost, Easy to apply, Easy to repair, recoat & touchup, Available in variety of colours, Good clarity, Long pot life, Water resistant, Easy to strip, No formaldehyde release, Isocyanate free. MELAMINE POLISH/COATINGS are: High solids - So film build is good, Very good stain, Water & Chemical resistance, Excellent adhesion, High Stain, Scratch/Abrasion resistance, Good resistance against heat/hot water - so hot cup /glass marks dosent affect the coating, Good clarity, Smooth finish.POLYURETHANE (PU) POLISH/ PAINT/ COATINGS are: Best in class paint/Coating - High solids, provides Excellent flexibility, Varity of finishes can be achieved from dead matt to very high gloss smooth finish, High Protection against Ultraviolet (UV) rays & weathering (Non yellowing properties), Very good mechanical properties, High resistance against heat/hot water - so hot cup /glass marks dosent affect the coating, Excellent hardness & abrasion/ scratch resistance, Excellent water & chemical resistance, Very good clarity & depth, Available in variety of colours, Performance in harsh enviroments, Very good Corrosion resistance, Good electrical insulating properties, Versatility. Water based Polyurethane (PU) coatings are also now available in the market which is better for our environment due to its low VOC & Low Odor.POLYESTER PAINT/ POLISH/ COATINGS are: Very High solids - +/-96% - Very high & hard film build, Excellent resistance to Chemicals, Acids, Stains, Abrasion, Water marks, Scratch resistance, Very high gloss & depth, Very strong adhesion, High resistance to removal & shrinkage.
DISADVANATGESSYNTHETIC ENAMEL OR OIL PAINTS have: Slow dry time - Allows greater potential for dust to settle in your finish, Low scratch resistance, Old technology, Flammable Liquid.NITROCELLULOSE OR NC LAQUER/PAINTS are: Less resistant to heat - Prone to hot water marks, Low resistance to solvents, Low scratch resistance, Very high gloss finishes cannot be achieved, Flammable Liquid.MELAMINE POLISH/COATINGS: Cannot be used in exeriors, Emits formaldehyde, Short pot life after adding hardener (8 hours), Difficult to Repair & Strip, Needs sanding between coats for adhesion, Flammable Liquid.POLYURETHANE (PU) POLISH/ PAINT/ COATINGS have: High Cost, Short pot life after adding hardener (upto 4 hours), Lot of qualities are available for various surfaces - so choosing the right product is critical, Needs dust free environment, Skilled applicator is essential for desired results, Contains Isocyanate, Sensitive to environmental changes primarily temperature & humidity, Slow drying, Flammable Liquid.POLYESTER PAINT/ POLISH/ COATINGS have: Very high cost, Very short pot life after adding hardener accelerator (only few minutes), Skilled applicator is a must for desired results, slow drying, Special equipment is required, Labor intensive job, Requires dust proof environment, Cannot be applied in carvings, Flammable Liquid.
RECOMMENDATIONSynthetic Enamels are not suited for heavy applications requiring extreme resistance properties but they are ideal for light duty applications with moderate durability on metals and wood based products & furnitures.DUCO or NC or Nitrocellulose paints are not suited for heavy applications requiring extreme resistance properties but they are ideal for light duty applications with moderate durability on Automobiles, Metals, wood based products & furniture & Industrial Items.Melamine polish/coatings are suitable for heavy duty interior applications on all wood based products & furnitures including table tops due to very good resistance against acids, tea, coffee, alcohol, stain marks etc. Melamine is not recommended for exterior applications.Polyurethane (PU) polish/coating is a heavy duty full package product which offers complete protection for your surface whether Interior or exterior with maximum durability. Due to its versatiliy its popularly used in Automobiles, Metals, Wood based products & furniture, Plastics, glass, floorings. Polyurethane (PU) coatings is a preferred industrial coating worldwide.Polyester coating in terms of finish, Hardness, High gloss (Glass like finish), Scratch resistance, Adhesion is the best coating available in the market. Due to these properties its preffered choice in luxury furniture segment. Is is not recommended for exterior applications.

Hello world!

Welcome to WordPress. This is your first post. Edit or delete it, then start blogging!

me5ogq

We are building the best WooCommerce theme in the world.

We fundamentally believe that our customers are more interested in a simple, attractive, and functional WordPress theme than they are having 12 color schemes to choose from, and a fancy slider with 8 transition effects.

If you pick out a WordPress theme like you pick out drapes, you’re doing something wrong.

Microsoft Makes Scaling WordPress On Azure Easier

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Etiam quis diam erat. Duis velit lectus, posuere a blandit sit amet, tempor at lorem. Donec ultricies, lorem sed ultrices interdum, leo metus luctus sem, vel vulputate diam ipsum sed lorem. Donec tempor arcu nisl, et molestie massa scelerisque ut. Nunc at rutrum leo. Mauris metus mauris, tristique quis sapien eu, rutrum vulputate enim.

Mauris tempus erat laoreet turpis lobortis, eu tincidunt erat fermentum. Aliquam non tincidunt urna. Integer tincidunt nec nisl vitae ullamcorper. Proin sed ultrices erat. Praesent varius ultrices massa at faucibus. Aenean dignissim, orci sed faucibus pharetra, dui mi dignissim tortor, sit amet condimentum mi ligula sit amet augue. Pellentesque vitae eros eget enim mollis placerat.

Aliquam non tincidunt urna. Integer tincidunt nec nisl vitae ullamcorper. Proin sed ultrices erat. Praesent varius ultrices massa at faucibus. Aenean dignissim, orci sed faucibus pharetra, dui mi dignissim tortor, sit amet condimentum mi ligula sit amet augue. Pellentesque vitae eros eget enim mollis placerat.

Four Alternative Keyboards For iOS 8

iOS users can finally tap into alternative keyboard software. Although you’d be forgiven for not changing from the stock Apple keyboard (pictured left) — given that Cupertino has buried the switch for enabling alternatives deep within settings. It has also given the stock iOS keyboard some TLC, adding a word prediction feature called Quick Type. This draws inspiration from various third party keyboard software makers by offering a trio of next-word suggestions above the Qwerty keyboard to speed up typing. So now you can just tap on a suggested word to type it…

Music and design workflow

Magnis modipsae que lib voloratati andigen daepeditem ut repro labor. Laceaque quiae sitiorem rest non restibusaes es tumquam core posae volor remped modis volor. Doloreiur qui commolu ptatemp dolupta oreprerum aut tibusam. Eumenis et consent accullignis dentibea autem inisita posae volor conecus resto explabo que voloratati andigen emperum quiae sitiorem.

Apple – Introducing iPhone 6 and iPhone 6 Plus

Featuring a larger, more advanced display, and significant leaps in capability and performance, iPhone 6 and 6 Plus represent the biggest advancement in design and engineering since we introduced the original iPhone.

Super-Awesome eCommerce HTML Templates

http://themeforest.net/?ref=shaikrilwan

Post navigation